|
LCD Panel
|
Keyset Mounting Keysets are delivered ready for desk-mounting but can be easily converted to wall-mounting by simply removing and reversing the plinth on the bottom of the keyset body. The handset "retaining-clip" on the keyset also needs to be turned 180 degrees to hold the handset in the wall-mounted situation.
|
||
| You need to be aware of two possible problems: | Some users hang-up the handset in
such a way that the RJ plug on the end of the handset-cord catches on the keyset body and
causes the handset cord to disconnect from the handset. Use a pair of pliers to cut the RJ
plug "release-clip" to prevent this from happening. The switch-hook assembly was incorrectly machined on a batch of keysets. There is no problem on a desk-mounted keyset, but there may be some problems in the switchhook not "hanging-up" if the keyset is wall-mounted. A modification kit is available from Hytel product support that can be used to fix this problem. |
||